eze System

eZEio Controller - Standard

The eZEio is a secure and simple networked control solution. With general purpose inputs and outputs, ModBUS and 1-wire interfaces it can be used for logging, monitoring and control of just about anything. Secure communications, very simple setup and management and a powerful web-based service makes the eZEio one of the most powerful and low-cost solutions available.

eZEio Controller - GSM

Same as the standard controller but this also has a GSM tranciever built-in that complements or replaces the Ethernet connection. The GSM is automatically used whenever a connection over wired Ethernet can't be established. Perfect for use where Cable/DSL is not available, or as a redundant backup for additional security.

Wattmeter, 120VAC

The WattNode® ModBus Wattmeter is a kilowatt hour kWh energy and power meter that communicates with the eZEio controller over a RS-485 network.

This model is designed for 120VAC circuits. It works with 1, 2 or 3 phases, and requires a neutral connection.

Wattmeter, 277VAC

The WattNode® ModBus Wattmeter is a kilowatt hour kWh energy and power meter that communicates with the eZEio controller over a RS-485 network.

This model is designed for 277VAC N-P circuits. It works with 1, 2 or 3 phases, and requires a neutral connection.

Dent PowerScout 3

The Dent PowerScout 3 is a Wattmeter that features inupt voltages from 100 to 600 V, Delta or Y connections, and an interface that allows direct use of flexible CTs. It also has insulated voltage connections and two intregrated relay outputs.

Current Transformer, split core bus bar, 600A/1.5x3.5"

Split-core bus-bar current transformer for the wattmeters.
For up to 600A, opening is 1.5" by 3.5".

Current Transformer, split core, 200A/0.75"

Split-core current transformer for the wattmeters.
For up to 200A / 0.75in wire.

Current Transformer, split core, 400A/1.25"

Split-core current transformer for the wattmeters.
For up to 400A / 1.25in wire.

Current Transformer, split core, 800A/2"

Split-core current transformer for the wattmeters.
For up to 800A / 2.0 in wire.

Rogowski Coil Current Transformers

Rogowski Coils are flexible current transformers. They come in three sizes, 16 inch, 24 inch and 36 inch, Suitable for bus bar diameters of 5", 7.5" and 10.5" respectively. For use only with the Dent Powerscout 3 meter.

Thermostat T32P

The T-32-P is a single zone thermostat, capable of running one, two or three stage systems. Up to 20 thermostats can be connected to a single eZEio.

Variable Frequency Drives

The eZEio Controller is compatible with Invertek ModBus VFDs. These drive all all special order and are cold per application. Please call for more information.

Microlan HUB

Allows you to easily connecto up to five additional microlan devices on the same port.

Output Expansion Module

Add four controllable relay outputs to the eZEio though MicroLAN.

CO2 sensor, duct probe with display

CO2 sensor, wall mount with display

Slim line, wall mount CO2 sensor with display.
Connects to the eZEio analog inputs.

CO2 sensor, wall mount for outdoor use

CO2 sensor for outdoor / greenhouse applications. Water resistant enclosure.

Temperature probe

An accurate temperature probe for the MicroLAN bus. 3m (10ft) wire with stainless steel encapsulated probe.

Motion Sensor