The ezeio Controller comes ready to use to start monitoring, logging and controlling over the Internet.

As soon as the controller is connected to power and an Internet or GSM connection, it will start communicating with the eze System servers. There is no need for special software or network setup. The ezeio connection is encrypted, bidirectional and very efficient.

The ezeio comes complete with antenna, a power supply, an ethernet cable and 4 months of basic service.

The ezeio-G controller works exactly like the basic version, but adds a built-in GSM radio that automatically activates if an Ethernet connection can't be established.

Works with AT&T or T-Mobile service in the US. Note that SIM card is not included, and a separate GSM service is required to use the wireless feature.

In a small setup with a few inputs logging data, the ezeio typically use less than 5MB data per month. The data use obviously goes up if many inputs log data very often or API features are used.

The ezeio-GSM is a perfect solution where Ethernet access is not available, on moving platforms or as a backup to the wired connection.

Features:

• Built-in GSM cell phone transciever
• Automatic fail-over to GSM if hardwired Ethernet is not available
• 4 analog general purpose inputs (0-10V / 4-20mA / S0-pulse / digital)
• 2 general purpose relay outputs (max 50V@2A)
• ModBus compatible serial port
• MicroLAN (1-wire) master
• Standard Ethernet 10/100 port
• Runs on 8-25VDC, <1W typical draw
• Logging interval configurable from 10 seconds up to 4 hours for each input
• Up to four alarm thresholds for every input
• Alarms can send email, control outputs, set modes and more
• Live access from standard web interface
• No special firewall or network configuration
• HTTP XML API available for easy integration with other systems
• Includes antenna, 12VDC power adapter and a 6ft Ethernet cable

Download the full manual here